Accessing Factory Presettings; Changing The Appearance Of The Display; Control Via The System Remote Control - Renkforce EQ-1000 Bedienungsanleitung

Accessing factory presettings

There are already 4 factory settings preprogrammed to the unit for different music material. Furthermore there is
presetting (FLAT) which has no effect on the sound.
• To access one of these presettings, press the CLASSIC (6), DISCO (7), JAZZ (8) or Rock (9) buttons.
• If you would like the equalizer to have no effect or would like to reset all the equalizer bands to the initial position,
press the FLAT (5) button.

Changing the appearance of the display

The display (2) represents the individual equalizer bands and their settings. If no button is pushed for some time, the
display switches to the spectrum display. The level of the individual bands is displayed in this mode.
• Press the DISPLAY/MEMORY button (10) in spectrum display mode until the desired display presentation
appears.

Control via the system remote control

Using the remote control supplied with the A-1000 HiFi Amplifier you can switch the equalizer off and on by pressing
the POWER button on the remote control.

To do so the POWER button (1) must be at the ON setting on the equalizer.
26
Operating Instructions

English