Technical Data - Renkforce 1192999 Bedienungsanleitung

A channel is not working:
• A cinch cable is not connected to the audio output of the DJ MP3 player or the amplifier/mixer input.
• The balance control on the amplifier/mixer is set incorrectly.
• The cinch connection cable is defective.
There is a buzzing noise:
• The cinch cable is defective.
All repairs other than those described here may be carried out by an authorized professional
only.

15. Technical data

Operating voltage............................................... 100-240 V/50/60 Hz
Power consumption........................................... 15 W
Output voltage .................................................... 900 mV/10 kOhm
Output impedance.............................................. 47 kOhm
Frequency response . ......................................... 20-20,000 Hz
Distortion factor ................................................. <0.8 %
Channel separation............................................ 65 dB
S/N ratio............................................................... 65 dB
Pitch ..................................................................... +/-4/8/16 %
Pitch Bend . .......................................................... +/-16 %
Track memory ..................................................... 20
Dimensions (W x H x D)..................................... 203 x 70 x 245 mm
Weight . ................................................................. approx. 1.7 kg
Ambient conditions . ........................................... -10 to +45 °C / 10-90 % relative humidity
41