Fein FMM350Q Betriebsanleitung Seite 17

Original Instructions. en
Symbols, abbreviations and terms used.
Symbol, character
WARNING
Character Unit of measurement,
international
P
W
1
P W
2
U
V
f
Hz
n
/min, min
S
°
kg
L dB
pA
L
dB
wA
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving back and forth.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
Observe the instructions in the text or graphic opposite!
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Gripping surface
Observe the information in the adjacent text!
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Product with double or reinforced insulation
Low oscillation rate
High oscillation rate
Unit of measurement,
national
W
W
V
Hz
-1
, rpm, r/min /min
°
kg
dB
dB
Explanation
Power input
Output
Rated voltage
Frequency
Rated oscillation rate
Oscillation angle
Weight according to EPTA-Procedure 01/2003
Sound pressure level
Sound power level
en
17