Safety Information; Description Of Operating Elements - Conrad CT 2 Bedienungsanleitung

Safety information

Should damage result from non-observance of this
manual, any guarantee claim will be void! We ac-
cept no responsibility for consequential damage!
We accept no responsibility for damage to property
or injury to persons caused by improper operation
or failure to observe the safety instructions. Such
cases void the guarantee.
For safety and (CE) licensing reasons, the unauthorised conversion
and/or modification of the Timer is not permitted.
Only a size (AAA or equivalent) battery may be used as voltage
source.
Pay attention to proper operation. In this connection read through
the operating instructions carefully.
Never operate the Timer in the presence of inflammable gases or
liquids.
Do not expose the Timer to high temperatures, strong vibration or
moisture.
This Timer is not a toy. Keep it away from small children, because
parts might be swallowed.
4

Description of operating elements

6
00
1
2
5
BIG DIGIT TIMER
1 = Display: the set or remaining time can be read here
2 = Up button: with this button the time can be increased by 1 minu-
te per press of the button at any time: by holding the button do-
wn, the time is increased more quickly
3 = Down button: with this button the time can be decreased by 1
minute per press of the button at any time: by holding the but-
ton down, the time is decreased more quickly
4 = Start/stop button: with this button the Timer can be started or
stopped again and the alarm turned off after expiry of the set
time.
5 = Battery compartment cover with table stand
6 = Wall-mounting hole
M
H
:
00
START/STOP
3
4
5