Conrad Neoclassic Bedienungsanleitung Seite 3

O P E R A T I N G I N S T R U C T I O N S
Neoclassic LED Wristwatch
Item-No. 67 22 92
Use in accordance with manufacturer's instructions
This wrist watch features an AR (anti-reflection) coated display, a metal housing and a PU
(polyurethane) watchstrap.
The time and date are shown on the display via red dot-matrix digits. The time can be indicated
in 12 or 24 hour indicating format.
The watch features a water tightness of up to 3 ATM.
Any use other than described above is not permitted and can damage the product. The product
may not be altered or converted.
All the safety and operating instructions in this manual must be followed carefully. Please read
the entire operating manual before using the product. Always retain it for later reference.
Explanation of the Symbols
The exclamation mark in a triangle indicates a particular risk during handling,
operation and control.
The "Hand" symbol indicates special tips and operating information.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for damage to pro-
perty and injury to persons caused by mishandling or non-compliance with the
safety instructions! The product may not be altered or converted. In such
cases the warranty will be null and void.
General Safety Instructions
• If you have any doubts about the correct operation, or the safety of the device,
please consult a specialist.
• The product is not a toy and must be kept out of the reach of children.
• Do not leave packing materials unattended. They may become dangerous
playthings for children.
• If you sell this product or give it away, you must hand over these operating
instructions.
• Also observe the safety instructions in the individual sections of this operating
guide.
• Maintenance, adjustment and repair may only be carried out by a specialist or a
specialised repair shop.
• If you have any questions, which are not answered in this manual, please contact
our technical customer service.
Product Specific Safety Instructions
• This product must not be exposed to high mechanical pressure.
• Falls from a low height can damage the product.
• This product must not be exposed to extreme temperatures, strong vibrations,
moisture or heavy mechanical stress.
• After rapid changes in temperature, the product requires some time to adjust to the
surrounding temperature. Wait until the components have adjusted to the ambient
temperature before use.
• If safe operation is no longer possible, take the device out of service and secure it
against unintended use.
Battery Safety Information
• Make sure that the polarity is correct when inserting the batteries.
• Remove the batteries, if you are not going to use the device for a while, to prevent
damage from leaking.
• Leaking or damaged batteries/rechargeable batteries can cause acid burns on
contact with the skin. Therefore, you should wear protective gloves when handling
damaged batteries/rechargeable batteries.
• Do not leave batteries/rechargeable batteries lying around; they could be
swallowed by children or pets. If swallowed, consult a doctor immediately.
• Ensure that batteries/rechargeable batteries are not short-circuited or thrown into
a fire. There is a risk of explosion!
• For the proper disposal of (rechargeable) batteries, please read the chapter
"Disposal".
Initial Start Up
When delivered, the watch is in the so-called "sleeping mode".
Press any key to turn the display on.
Setting the time format, time, year, month, day
www.conrad.com
• Press and hold the keys "MODE", "SET" and "ADJ" for approx. 1 second. Following that, the
time will be displayed.
• Press and hold the "SET" button for approx. 2 seconds. 12H or 24H will be displayed (= time
Version 02/11
display 12-hour format or 24-hour format).
• Press the "ADJ" key to set the desired time format.
• Press the "SET" button. The hour display flashes.
• Set the current hour using the "ADJ" button.
• Press the "SET" button. The minute display flashes.
• Set the current minute using the "ADJ" button.
• Press the "SET" button. The year display flashes.
• Set the current year using the "ADJ" button.
• Press the "SET" button. The month display flashes.
• Set the current month using the "ADJ" button.
• Press the "SET" button. The day display flashes.
• Set the current day using the "ADJ" button.
• Press the "SET" key to save the settings.
Product view
Operating the watch
Press any key for approx. 1 second and the time will be displayed.
While in time display, press the "MODE" button to display the date.
Press the "MODE" key again to display the current year.
Press the "MODE" button a third time to return to the time display.
Setting the display brightness
The display can be adjusted to 5 brightness levels.
To adjust the brightness press the "ADJ" button several times while in time display.
On the left side of the display the currently set brightness level will be displayed (via 5 LEDs).
If the bottom LED flashes, the lowest brightness level is set. The more LEDs are blinking, the
brighter the display will be.
Press the "MODE" or the "SET" key to save the settings.
Maintenance and Cleaning
• To clean the watch, a dry, soft and clean cloth is sufficient. For heavier soiling of the exterior,
you can moisten the cloth slightly with lukewarm water.
• Clean the watch very carefully, otherwise you may scratch it. Do not press too strongly on the
glass cover as this may cause scratch marks.
• Never use aggressive cleaning agents or chemicals as this will damage the watch.
Information on the water tightness
The watch features a water tightness of up to 3 ATM.
Declaration of the water tightness according to DIN 8310
Press the "MODE" button during programming to exit the setting menu without
saving.
Please note that the setting menu will be exited automatically if no keystroke is per-
formed for 10 seconds.
If no key is pressed within 5 seconds, the display goes out automatically.
Please note that the indication for water tightness applies to the watch in its initial,
new state and that this is not a permanent feature. The inbuilt sealing elements may
diminish in their function and with daily use.
The weak points of watertight watches are the watch glass, winder, housing bottom
and even design and structure of the housing.
Please note that high pressures are temporarily created through intense swimming
movements or when jumping into water.