5. Service and special instructions
The mobile elements of the VTA-Lifter, particularly the fine threats are oiled with a not
resinated grease. This assures an accurate adjustment setting. An after-oiling is only
necessary when the threat bore is often taken out of the VTA-Lifter to change the fitting
sleeve. In this case only use the lubrciation grase recommended by clearaudio. To get
further information please contact your dealer / distributer or contect clearaudio directly.
For more details please contact our clearaudio service-hotline:
Tel: +49-(0)1805/059595.
6. Technical Data
Inserted materials
Weight:
Dimensions (B*H*T):
Warranty:
Seite/Page 14
VTA-Lifter: stainless steel // fitting sleeves: steel, nickel-plated
ca. 650 gr. Without fitting sleeves
85mm x 52mm x 62mm
5 years
VTA - Lifter
Bedienungsanleitung
clearaudio electronic GmbH 2005