Cleaning, Sanitization And Disinfection - MPV Medical MicroDrop Pro2 Gebrauchsanweisung

EN

Cleaning, Sanitization and Disinfection

Clean the nebulizer and accessories as described below before and after each
use. Disinfect/Sanitize at least once a day. Personal use of the nebulizer and
its accessories is recommended to avoid the risk of infection.
1. Preparation
Open the nebulizer by turning the upper part (Fig. F1) counterclockwise. Pour
away any remaining medication. Disconnect the nozzle from the top of the
nebulizer (Fig. F1). Remove the mouthpiece or mask from the nebulizer. Rinse
these parts under running water.
2. Cleaning
Outer surface of the compressor and tubing:
Use only a slightly damp cloth with an antibacterial detergent (non-abrasive
and solvent-free).
3. Sanitization
Method A (warm water or dishwasher)
Nebulizer and accessories:
Clean the accessories E1, E2 (without rubber band), E3, E4, E5 for about 5
minutes in warm water (about 40 ° C) and with mild (non-abrasive) deter-
gent. Or put the parts in the dish rack of your dishwasher and start a 70°C hot
rinse programm. Do not use the dishwasher in combination with dirty dishes
when cleaning the nebulizer.
Method B (vinegar solution)
Clean accessories E1, E2 (without rubber band), E3, E4, E5 by soaking in a
solution of 50% water and 50% white vinegar for about 60 minutes. Then
rinse thoroughly with warm tap water (about 40°C)
14