MPV Medical MicroDrop Pro2 Gebrauchsanweisung Seite 33

• Do not put the device near heat sources, direct sunlight, or in hot environ-
ments.
• Do not obstruct or insert any objects in the filter or in its housing in the
device.
• Do not obstruct the air vents placed on both sides of the unit.
• During use, always place the unit on a firm surface clear of obstacles.
• Check that there is no material obstructing the air vents before each use.
• Do not place any objects inside the air vents.
• Repairs, including the replacement of the power cord, must be performed
by authorized personnel only following the information provided by the
Manufacturer. Any unauthorized repairs will void the warranty and may
pose a safety hazard for the user.
• The average duration provided for compressor is: 1000 hours.
Do not modify this equipment without authorization of the
manufacturer.
• The Manufacturer, the Retailer and the Importer are responsible for the sa-
fety, reliability and performance of the device only if: a) the device is used
in accordance with the operating instructions b) the electrical system of
the premises where the device is used is in compliance with current laws.
• Interactions: The materials used that come into contact with medications
have been tested with a wide range of medications. However, due to the
variety and continuous evolution of medications, the possibility of a che-
mical interaction cannot be excluded. We recommend that once the medi-
cation has been opened you should use it as soon as possible and avoid
prolonged contact of the medication with the nebulizer.
• The manufacturer should be contacted for reporting problems and/or
unexpected events related to device operation and if necessary for clarifi-
cations on use, maintenance or cleaning.
EN
9