Care And Cleaning; Technical Data - Renkforce RF-GHD-500PRO Bedienungsanleitung

Care and cleaning

• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the housing or stop the product from functioning properly.
• Do not immerse the product in water or other liquids.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.

Technical data

Input voltage / current ................... 5 V/DC, 500 mA
Connection type ............................ USB
Current consumption .................... max. 300 mA
Loudspeaker diameter .................. 50 mm
Impedance (headphone) .............. 16 Ω
Frequency range .......................... 20 Hz - 20 kHz
Sensitivity (loudspeaker) .............. 110 dB ±6 dB
Microphone ................................... 9 x 7 mm
Sensitivity (microphone) ............... -58 dB
Directivity ...................................... Omnidirectional
System requirements .................... Windows
Cable length ................................. 2 m
Operating conditions ..................... 0 to +40 °C, 25 % – 85 % relative humidity
(non-condensing)
Storage conditions ........................ -10 to +60 °C, 25 % – 85 % relative humidity
(non-condensing)
Dimensions (L x W x H) ................ 190 x 95 x 230 mm
Weight .......................................... 410 g
(for the software)
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1637656_v3_0718_02_DS_m_4L_(1)