Maintenance And Storage - Yard Force SDEG04B Original Bedienungsanleitung

13. Keep all guards and deflectors in place and in good
working condition;
14. Do not transport this machine while the power source is
running;
15. Shut off the power source and disconnect from supply
whenever you leave the work area;
16. Do not tilt the machine while the power source is
running.
17. To keep extension cords away from the shredding
means. The shredding means can cause damage to the
cords and lead to contact with live parts.
18. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
19. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that
they do not play with the appliance.

Maintenance and storage

1. When the machine is stopped for servicing, inspection,
or storage, or to change an accessory, shut off the power
source, disconnect from supply, make sure that all moving
parts have come to a complete stop and, where a key is
fitted remove the key. Allow the machine to cool before
making any inspections, adjustments, etc.
2. Always allow the machine to cool before storing;
3. When servicing the cutting means be aware that, even
32