Yard Force SDEG04B Original Bedienungsanleitung Seite 33

to make certain that it is empty;
2. Keep your face and body away from the feed intake
opening;
3. Do not allow hands or any other part of the body or clothing
inside the feeding chamber, discharge chute, or near any
moving part;
4. Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the base of
the machine when feeding material into it;
5. Always stand clear of the discharge zone when operating
this machines;
6. When feeding material into the machine be extremely
careful that pieces of metal, rocks, bottles, cans or other
foreign objects are not included;
7. If the cutting mechanism strikes any foreign objects or if the
machine should start making any unusual noise or vibration,
shut off the power source and allow the machine to stop.
Disconnect from supply and take the following steps:
8. Inspect for damage;
9. Check for and tighten any loose parts;
10. Have any damaged parts replaced or repaired with parts
having equivalent specifications.
11. Do not allow processed material to build up in the discharge
zone; this may prevent proper discharge and can result in
kickback of material through the feed intake opening;
12. If the machine becomes clogged, shut-off the power
source and disconnect from supply before clearing
debris. Keep the power source clear of debris and other
accumulations to prevent damage to the powered source
or possible fire. Remember that operating the starting
mechanism on engine powered machines will still cause the
cutting means to move;
31