Kerbl SmartCam HD 10812 Bedienungsanweisung Seite 27

Manage cameras on PC (optional)
You also can manage total 9 cameras on PC by the wire-
less network after install the PC software „IPCamera
tools".
Install the IPcamera tools.exe program on your Note-
book PC. Run the „IPCamera" program, If your notebook
is in the same network with the camera, (Wifi or the
cabled Internet), the camera will show with its IP address.
Note:
If your camera is in AP mode, your notebook PC should
choose the same Wifi name as camera: IPCAM_xxxx.
If your camera is in STA mode (It has been hooked to the
wifi of your wireless router), your notebook PC should
choose the same wifi name of your wireless router.
Click the line of camera's IP address, then you will enter
the log interface of camera
Log in the camera with user name admin (no password),
click confirm.
Choose „Image refresh mode", you will see the video
from camera
27