Kerbl SmartCam HD 10812 Bedienungsanweisung Seite 25

Switch between STA mode to AP mode
If you want the camera disconnect with wireless Router,
you can switch the camera mode from STA mode to AP
mode again. Click setting gear of the camera you want to
set on camera list, then a Pop up menu appear on the
bottom, click the „settings" icon and then „wire-
less settings". You will see wireless LAN Mode setting
button, click on „AP" mode, the camera will disconnect
from the Wifi network of your wireless router and back
to the AP mode which can view video directly by smart
phone.
Advance function
1. Scheduled Recording function
When you use the camera for home security, you may
want to record video on the SD card of the camera or
network disk.
You can set as follow:
1. In the camera list click setting gear icon
of the camera which you want to set.
2. Then click icon on the Pop UP menu
on the bottom.
3. You will see the setting list, click on „Advanced" Tab
4. You will see the sub-setting menu, click on „record
setting" as below
5. You will enter record schedule setting sub menu. Click
„Edit Schedule", select the specify date and time you
want to record, then click „set".
25