C) Setting The Stereo Effect; D) Setting The Pad Sensitivity; Saving Settings - MC Crypt 30 39 97 Bedienungsanleitung

c) Setting the stereo effect

You can set the balance for each pad, i.e. how loud the corresponding
sound effect of a pad is emitted on the left or right-hand speaker (similar
to the balance setting on a radio).
Press the "PAN" button (14) once.
Hit the pad which you wish to adjust.
Then you can use the "SELECT +" and "SELECT -" buttons (15) or the
adjustment wheel (20) to alter the balance.

d) Setting the pad sensitivity

The sensitivity of each pad can be adjusted, i.e. the strength of contact
by which the programmed sound is emitted can be adjusted.
Press the "GAIN" button (14) once.
Hit the pad which you wish to adjust.
Then you can use the "SELECT +" and "SELECT -" buttons (15) or the
adjustment wheel (20) to alter the sensitivity (E00-E09, a higher value
means that the pad will react more sensitively to contact/touch).
e) Saving settings
The settings made in the following sections from a) to d) can be saved
later in one of the 5 drum kits from "026" to "030".
Press the "SAVE" button (16) once.
The drum kit "026" now flashes in the display.
Now use the "SELECT +" and "SELECT -" buttons (15) or the adjustment
wheel (20) to select one of the programmable drum kits (026-030).
Save the drum kit by pressing the "SAVE" button (16) once again.
If an error occurs during saving, "Err" appears in the display. Then try to
save the drum kit under another programmable drum kit code.
34