Structure And Functions; Battery Charging - Lavorwash FREE EVO Bedienungsanleitung

simple but important operations:
- Identify the work area, moving all possible obsta-
cles out of the way; if the surface is very extensive,
work in contiguous and parallel rectangular areas.
- Choose a straight work trajectory and begin wor-
king from the farthest area to avoid passing over
areas that have already been cleaned.
6.2

STRUCTURE AND FUNCTIONS

PHOTO A MODEL E
1 General on/off switch
2 Brush motor switch
3 Suction motor switch
PHOTO B MODEL E
1 Power supply cable
2 Water outlet adjusting lever
3 Brush plate lift/lower lever
4 Squeegee lift/lower lever
5 Brush operation lever
6 Recovery tank drain hose
PHOTO C MODEL B - (DC 24V)
1 Brush motor switch
1A Brush motor operation led
2 Suction motor switch
2A Suction motor operation led
3 Battery power test
3A Green led - full battery charge
3B Yellow led - 50% battery charge
3C Red led - battery discharged
PHOTO D MODEL B - (DC 24V)
1 General on / off key switch
2 Brush operation lever
3 Brush plate lift/lower lever
4 Squeegee lift/lower lever
5 Brush motor thermal breaker
6 Recovery tank drain hose
7 Battery connector
8 Water outlet adjusting lever
PHOTO E MODEL BT/T - (DC 24V
WITH TRACTION)
1 Battery power test
1A Green led - full battery charge
1B Yellow led - 50% battery charge
1C Red led - battery discharged
2 Forward/reverse indicator
3 Reduce speed switch
3A Traction speed 1
3B Traction speed 2
3C Traction speed3
3D Traction speed 4
4 Increase speed switch
5 Brush motor switch
5A Brush motor operation led
6 Suction motor switch
6A Suction motor operation led
PHOTO F
WITH TRACTION)
1 General on / off key switch
2 Forward/reverse traction operation lever
3 Brush plate lift/lower lever
4 Squeegee lift/lower lever
5 Brush motor thermal breaker
6 Traction motor thermal breaker
7 Recovery tank drain hose
8 Battery connector
9 Water outlet adjusting lever
PHOTO G
WITHOUT AND WITH TRACTION)
1 Battery compartment opening lever
2 Solution tank filling opening
PHOTO H
without and with traction)
Battery connection diagram
PHOTO I
without and with traction)
1 Opening clip spring
2 Battery compartment with 12v
Batteries
3 Battery connection wiring
PHOTO L
without and with traction)
1 Built-on battery charger
2 Battery charger power supply cable
PHOTO M
1 Squeegee bumper wheel
2 Squeegee pression adjusting knob
3 Suction hose
4 Squeegee blades replacement
knob
5 Squeegee wheel
6 Squeegee fixing knob
7 Squeegee inclination adjusting
knob
PHOTO N
1 Hood of suction filter compartment
2 Solution tank filling opening
3 Recovery tank
4 Solution tank
PHOTO O
1 Floating device
2 Suction filter
3 Recovery tank inspection
PHOTO P
1 Solution water filter
6.3

BATTERY CHARGING

Connect the patch cord to the power cable of the
33
MODEL BT/T - (DC 24V
MODEL B - BT/T - (DC 24V
MODEL B - BT/T - (DC 24V
MODEL B - BT/T - (DC 24V
MODEL B - BT/T - (DC 24V
MODEL E - B - BT/T
MODEL E - B - BT/T
MODEL E - B - BT/T
MODEL E - B - BT/T