Veroval compact BPU 22 Gebrauchsanleitung Seite 65

Table 4
Recommended separation distances between portable and mobile RF communications equipment and the Veroval
The Veroval BPU 22 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer
®
or the user of the Veroval BPU 22 can help prevent electromagnetic interference by maintaining a minimum distance between portable and
®
mobile RF communications equipment (transmitters) and the Veroval
power of the communications equipment.
Rated maximum Separation distance according to frequency of transmitter
output power of m
transmitter
150 kHz to 80 MHz
W
(out ISM and amateur
radio bands)
d = 1.2
0.01 0.12
0.1 0.38
1 1.2
10 3.8
100 12
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,
objects and people.
BPU 22 as recommended below, according to the maximum output
®
150 kHz to 80 MHz (in 80MHz to 800MHz
ISM and amateur radio
bands)
d = 2 d = 1.2
0.2 0.12
0.632 0.38
2 1.2
6.32 3.8
20 12
65
BPU 22
®
800MHz to 2.7GHz
d = 2.3
0.23
0.73
2.3
7.3
23