Veroval compact BPU 22 Gebrauchsanleitung Seite 63

Table 3
Guidance and manufacturer's declaration - electromagnetic Immunity
The Veroval BPU 22 is intended for use in the electromagnetic environment specified below. The customer or the user of the Veroval
®
should assure that it is used in such an environment.
Immunity Test IEC 60601 Test level
Conduced RF 150KHz to 80MHz:
IEC61000-4-6 3Vrms
6Vrms (in ISM and
amateur radio bands)
80% Am at 1kHz
Radiated RF 10V/m
IEC61000-4-3
Compliance level Electromagnetic environment - guidance
Not applicable Portable and mobile RF communications equipment should be used
no closer to any part of the Veroval
the recommended separation distance calculated from the equation
appropriate for the frequency of the transmitter. Recommended
separation distances:
d = 1.2
d = 2
10V/m 80 MHz to 800 MHz:
d = 1.2
800 MHz to 2.7 GHz:
d = 2.3
63
BPU 22, including cables, than
®
;
Where, P is the maximum output power rating
of the transmitter in watts (W) according
to the transmitter manufacturer, d is the
recommended separation distance in meters
(m) Field strengths from fixed RF transmitters,
as determined by an electromagnetic site
survey , should be less than the compliance
a
level in each frequency range
Interference may occur in the vicinity of
equipment marked with the following symbol:
BPU 22
®
.
b