Herunterladen Inhalt Inhalt Diese Seite drucken

Siemens SIMATIC NET CP 1623 Betriebsanleitung Seite 35

Vorschau ausblenden Andere Handbücher für SIMATIC NET CP 1623:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Approvals and certificates
Notice for Australia
C-TICK
The communications processor meets the requirements of the AS/NZS 3548
standard.
Notices for Canada
ICES conformity
This digital class B apparatus complies with the Canadian standard ICES-003.
CSA approval
The SIMATIC NET communications processor has an approval in accordance with
the CAN/CSA C22.2 No. 60950-1 standard.
Notices for USA
FCC approval
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Siemens AG is not responsible for any radio television interference caused by
unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by Siemens AG. The
correction of interference caused by such unauthorized modification, substitution or
attachment will be the responsibility of the user. The use of shielded I/O cables is
required when connecting this equipment to any and all optional peripheral or host
devices. Failure to do so may violate FCC and ICES rules.
CP 1623
35
A5E01175608-04, Release 07/2009

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis