First Use; Installing The Software - Silvercrest SVG 2.0 A2 Bedienungsanleitung

English

First use

Installing the software

The required software (drivers and applications) must first be installed before you
plug in the device. Important files can be overwritten and altered during installation of
programs or drivers. You should back up the contents of your hard drive before
installing the program so that you can still access your original files if there is a
problem with the installation.
If your operating system is configured so that the installation of software and drivers is
only accepted if they are signed (approved by Microsoft), an appropriate dialog box
will appear. This does not mean that the driver is defective, but only indicates that it
does not have the Microsoft signature. You can ignore this advice. Click on "Next" to
install the driver.
 Insert the enclosed CD ROM into the drive and the installation menu will open automatically.
 Click on the desired national flag to select the relevant language.
 Install the software (Power Director) and the driver according to the directions on the screen.
 Restart your PC after installation to complete the process.
If the installation wizard does not automatically start when the CD ROM is inserted,
then the Autorun function of your CD drive is deactivated. Then proceed as follows:
 Open the Explorer file or Windows Explorer.
 Double-click on your CD drive with the left mouse button.
 Then start the Autorun function by double-clicking with the left mouse button on the Autorun
application (Autorun.exe).
A description of the software can be found on the CD-ROM under the item "Power
Director Help".
8
SilverCrest USB 2.0 Video Grabber SVG 2.0 A2