Remote Control Of The Unit From A Smartphone; File Transfer From The Unit To A Smartphone - Tascam DR-22WL Bedienungsanleitung

8 If using an Android device
Press the Wi-Fi button of the unit to make the Wi-Fi
1.
indicator blink.
A pop-up message appears on the display.
You will be making a connection to a previously
2.
connected smartphone, so press the F2
The pop-up message on the display disappears and the
3.
waits for a connection with a smartphone.
On your Android device, select "Settings" w "Wi-Fi".
4.
When you turn on Wi-Fi on your Android device, a Wi-Fi
5.
device SSID list appears. Select the SSID shown on the
display of the unit.
A Wi-Fi connection between the unit and your smart-
6.
phone is established and the Wi-Fi indicator is lit.
NOTE
The operation for Android devices explained above is
for smartphones. For details, see your smartphone's
operation manual.
14
TASCAM DR-22WL
Remote control of the unit from a
smartphone
Since the dedicated application (DR CONTROL) has the same
display screen as that of the unit, you can operate the unit
by remote control with the application almost the same way
button.
as operating from the unit. Before using the "DR CONTROL"
application, confirm how to operate the unit. That way, you will
be able to use the application smoothly.
When you have established the Wi-Fi connection between
1.
the unit and your smartphone, start the "DR CONTROL"
application installed on your smartphone.
After starting the "DR CONTROL" application, the following
2.
screen appears on your smartphone and you are able to
operate the unit by remote control.
For a detailed explanation of the "DR CONTROL" application,
see the "DR CONTROL Reference Manual", which can be
downloaded from the TEAC Global Site (http://teac-global.
com/).
File transfer from the unit to a smart-
phone
Press the "Browse" button on the "DR CONTROL" screen.
1.
The file list of the unit appears on the "Browse" screen.
2.
Select a file to transfer.
A file details screen appears. Press the "Copy" button.
3.
A file copy confirmation screen appears. When you press
4.
the "YES" button, file transfer from the unit to the smart-
phone starts.