Playback; Playing Back Recordings; Selecting A File For Playback (Skipping); Adjusting The Playback Volume - Tascam DR-22WL Bedienungsanleitung

Playback

Playing back recordings

While the Home Screen is open and playback is stopped, press
the PLAY button to start playback.
8 Pausing
While the Home Screen is open and a track is playing back,
press the PLAY or /MENU/8 button to pause playback at
the current position. (PAUSE)
8 Fast-rewinding and fast-forwarding
(search)
While the Home Screen is open, press and hold the . or
/ button to search backward or forward.

Selecting a file for playback (skipping)

During playback or while stopped, use the . and /
buttons to select the file that you want to play.
If you press the . button when the playback position is at
the middle of a file, playback will skip to the beginning of that
file. If you press the / button when at the beginning of a
file, playback will skip to the next file.

Adjusting the playback volume

The volume of sound output through the
can be adjusted using the OUTPUT LEVEL (+/−) button while
the Home Screen is open.

Using various playback functions

While playing back, stopped, or paused, set the scene
1.
dial to
.
Use the F3
button to select an item, and then press
2.
the F4
button to enable selection of various values.
Please see the Reference Manual for information about
playback functions.

Menu structure

TOOL
MARK SKIP MODE
DIVIDE
METRONOME
(Ver1.10-supported)
REVERB
SPEAKER

Connecting with a Computer

You can transfer audio files on the microSD card in the unit to a
computer and also transfer audio files from a computer to the
unit.
Connecting the unit to a computer by
USB
Use the included USB cable to connect the unit to a
1.
/LINE OUT jack
computer. If the power is off, turn it on.
On the
2.
USB SELECT
and press the F4
computer.
display.
When you open "Computer" in Windows, this unit shows
3.
on the computer screen as an external volume named
"DR-22WL".
Set the mark skip mode
OFF/ON
Divide a file
Use the metronome function
OFF/ON, TEMPO, BEAT
LEVEL,
Set reverb
SW, TYPE, LEVEL, MODE
Set the built-in speaker
OFF, ON
screen, select
STORAGE
button to connect this unit to the
will appear on the
USB connected

Exchanging files with a computer

Click the "DR-22WL" drive on the computer screen to show the
"MUSIC" and "UTILITY" folders.
To transfer files to the computer, open the "MUSIC" folder and
drag and drop the desired files where you want them to go.
To transfer files from the computer, drag and drop the desired
audio files on the computer to the "MUSIC" folder.
Disconnecting the unit from a
computer
Before disconnecting the USB cable, follow the proper proce-
dures for the computer to unmount this unit.
The power turns off after the unit completes its shutdown
process.
See the computer's operation manual for instructions about
how to unmount an external device.

Settings and Information Display

Turning the built-in speaker off

Select the /MENU/8 button w
TOOL
and set the speaker to .
OFF

System Settings

Use the SETUP menu to customize settings for using the unit.
You can also perform operations such as initializing settings
and formatting microSD cards.
Select the /MENU/8 button w
1.
system setting item, and then press the F4
Configure necessary settings for each function.
2.
TASCAM DR-22WL
w
SPEAKER
w a
SETUP
button.
11