Wireless Equipment Precautions; Compliance Of Radio Transmitter And Interference; Radiation Exposure Requirements; Information For Interference (Fcc Requirements) - Tascam DR-22WL Bedienungsanleitung

(b) By disposing of the electrical and electronic equipment
correctly, you will help save valuable resources and
prevent any potential negative effects on human health
and the environment.
(c) Improper disposal of waste equipment can have serious
effects on the environment and human health as a result
of the presence of hazardous substances in electrical and
electronic equipment.
(d) The crossed out wheeled dust bin symbol
indicates that electrical and electronic
equipment must be collected and disposed of
separately from household waste.
(e) The return and collection systems are available
to the end users. For more detailed information
about disposal of old electrical and electronic equipment,
please contact your city office, waste disposal service or
the shop where you purchased the equipment.
Disposal of batteries and/or accumulators
(a) Waste batteries and/or accumulators should be
disposed of separately from the municipal waste stream
via designated collection facilities appointed by the
government or the local authorities.
(b) By disposing of waste batteries and/or accumulators
correctly, you will help save valuable resources and
prevent any potential negative effects on human health
and the environment.
(c) Improper disposal of waste batteries and/or accumulators
can have serious effects on the environment and human
health as a result of the presence of hazardous substances
in batteries and/or accumulators.
(d) The crossed out wheeled dust bin symbol
indicates that batteries and/or accumulators
must be collected and disposed of separately
from household waste.
If the battery or accumulator contains more
than the specified values of lead (Pb), mercury
(Hg), and/or cadmium (Cd) defined in the Battery
Directive (2006/66/EC), then the chemical symbols for
lead (Pb), mercury (Hg) and/or cadmium (Cd) will be
indicated beneath the crossed out wheeled dust bin
symbol.
(e) The return and collection systems are available to the end
users. For more detailed information about disposal of
waste batteries and/or accumulators, please contact your
4
TASCAM DR-22WL
city office, waste disposal service or the shop where you
purchased them.

Wireless equipment precautions

Compliance of radio transmitter and
interference
Model for USA
This device complies with Part.15 of FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including
interference that may cause undesired operation.
Labeling of authorization
FCC ID: YOPGS2100MIP
Model for Canada
Compliance of radio transmitter
This device complies with Industry Canada licenceexempt RSS
standard(s). Operation is subject to the following two condi-
tions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.
Labeling of authorization
IC ID: 9154A-GS2100MIP
Compliance of interference
This ClassB digital apparatus complies with Canadian ICES-003.
Model for EEA (European Economic Area)
This equipment complies with the harmonised standards of
DIRECTIVE 1999/5/EC (R&TTE).
Labeling of conformity
Pb, Hg, Cd
CE marking:
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
CAUTION
Authorization of wireless devices are different in countries or
regions. Please use only in the country where you purchased
the product.
•
Depending on the country, restrictions on the use of Wi-Fi
wireless technology might exist.
Confirm the laws and regulations of the country or region
where you want to use the unit before use.

Radiation Exposure requirements

This equipment meets the regulation, which is recognized
internationally, for the case of human exposure to radio waves
generated by the transmitter.
Based on the following two conditions:
•
End-users and installers must be provided with antenna
installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
•
This equipment should be installed and operated with
minimum distance 20 cm (8") between the radiator and
your body.
8 Statement of compliance
Model for USA
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment.
Model for Canada
The device meets the exemption from the routine evaluation
limits in section 2.5 of RSS 102 and compliance with RSS-102
RF exposure, users can obtain Canadian information on RF
exposure and compliance.
EEA (European Economic Area) model
This equipment complies with EN.62311; Assessment of
electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields; the harmonised standard
of DIRECTIVE 1999/5/EC.
Information for interference
(FCC requirements)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable