Troubleshooting Guide - Pattfield PE-AHE 18 Li Originalbetriebsanleitung

10. Troubleshooting guide

Caution!
Before troubleshooting, switch off the equipment and remove the bat-
tery.
The table below contains a list of fault symptoms and explains what
you can do to remedy the problem if your equipment fails to work pro-
perly. If the problem still persists after working through the list, please
contact your nearest service workshop.
Fault
The equip-
ment does
not work
Equipment
operates in-
termittently
GB
Saw chain is
dry
Chain/guide
bar is hot
Anl_PE_AHE_18_Li_Basic_SPK7.indb 370 Anl_PE_AHE_18_Li_Basic_SPK7.indb 370
Possible cause
- Battery empty
- Battery is not correctly
inserted
- Loose connection (ex-
ternal)
- Loose connection (in-
ternal)
- ON/OFF switch defecti-
ve
- No oil in the tank
- Vent in the oil tank cap
is blocked
- Oil outlet is blocked
- No oil in the tank
- Vent in the oil tank cap
is blocked
- Oil outlet is blocked
- Chain is blunt
- Chain is overtensioned
- 370 -
Remedy
- Charge battery
- Remove battery and
insert again
- Consult a specialist
workshop.
- Consult a specialist
workshop.
- Consult a specialist
workshop.
- Top up with oil
- Clean the oil tank cap
- Clear the oil outlet
- Top up with oil
- Clean the oil tank cap
- Clear the oil outlet
- Re-sharpen or replace
the chain
- Check the chain tensi-
on
15.01.16 13:09 15.01.16 13:09