Maintenance And Service; Maintenance And Cleaning - Bosch PEX 220 A Originalbetriebsanleitung

14 | English
Do not use a sanding sheet for other materials after it has
been used to work on metal.
Use only original Bosch sanding accessories.
Rough Sanding
Attach a coarse grit sanding sheet.
Apply only light pressure to the power tool so that it runs at a
higher orbital stroke rate and a higher material removal rate
is achieved.
Fine Sanding
Attach a fine grit sanding sheet.
You can reduce the sanding plate orbital stroke rate by
lightly varying the contact pressure; the random orbit motion
will be retained.
Applying moderate pressure, move the power tool over the
surface of the workpiece, either in a circular motion or al-
ternating between crossways and lengthways. To avoid
sanding through the workpiece, e.g. veneers, do not tilt the
power tool.
Switch the power tool off once you have finished your work.
Usage Table
The figures in the table below are recommended values.
The best method for determining the best combination while
sanding or polishing is practical experimentation.
Application
Abrading paint
Retouching paint
Removing paint
Softwood
Hardwood
Veneer
Aluminium
Steel
Derusting steel
Stainless steel
Stone

Maintenance and Service

Maintenance and cleaning

Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by a
customer service centre that is authorised to repair Bosch
power tools.
1 609 92A 4DN | (25.05.2018)
After-sales service and advice on using products
Our after-sales service can answer questions concerning
product maintenance and repair, as well as spare parts. You
can find exploded drawings and information on spare parts
at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the type plate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or ar-
range the collection of a product in need of servicing or re-
pair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Grit
Magna Business Park
(coarse/fine
City West
sanding)
Dublin 24
180/320
Tel. Service: (01) 4666700
120/400
Fax: (01) 4666888
40/80 Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
40/240
Power Tools
60/320
Locked Bag 66
240/320
Clayton South VIC 3169
Customer Contact Center
80/240
Inside Australia:
60/240
Phone: (01300) 307044
40/120
Fax: (01300) 307045
120/240
Inside New Zealand:
Phone: (0800) 543353
80/200
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
Bosch Power Tools