After Using The Appliance / Cleaning; Troubleshooting - Bosch MFQ47304 Gebrauchsanleitung

en After using the appliance / cleaning
W Risk of injury from rotating drive!
Never grip the rotating tools. Do not attach
or remove tools until the appliance is
at a standstill – when switched off, the appli-
ance continues running briefly.
Protect long hair or loose items of clothing
to prevent them from becoming caught
in the rotating tools.
■ Before using the appliance for the first
time, clean base unit and tools.
X Fig. B
■ Completely unwind the power cord.
■ Place the required tool on the base unit
and depress until it locks into position.
Note the shape of the plastic parts on
the tools to prevent mixing them up (see
Fig. B-1)!
■ Plug into the mains.
■ Place the food in a suitable receptacle.
■ Insert tools into the receptacle and
switch on the appliance at the required
setting.
Settings 1, 2:
for working in and mixing in.
Settings 3, 4, 5:
for kneading and beating.
■ After working, set the switch to P
and release and remove the tools with
the ejector button.
Caution:
The ejector button cannot be actuated
unless the switch is in the P position.
Note:
Always switch off the base unit before
taking it out of the blended food.
12
09_MFQ47304_8001028712.indb 12
After using the appliance /
cleaning
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
W Risk of electric shock!
Never immerse the base unit in liquids
and do not clean in the dishwasher. Do
not steam-clean the appliance. Do not use
the appliance with damp hands.
Caution!
Do not use abrasive cleaning agents. Sur-
faces may be damaged.
Note: Discolouration of the plastic parts
may occur when processing foods such
as red cabbage and carrots. This can be
removed with a few drops of cooking oil.
■ Pull out the mains plug.
■ Wipe the base unit with a damp cloth
and then wipe dry.
■ Clean the tools in the dishwasher or with
a brush under running water.
X Fig. C
■ The power cord can be wound up to
facilitate storage of the appliance.
■ Attach mains plug to the cord clamp.

Troubleshooting

Fault
Switch cannot be moved to settings 1 to 5.
Remedy
■ When the rear aperture is open, selector
switch 1-5 will not function.
03.12.2015 15:28:50