Transporting The Appliance; Troubleshooting; Disposal - Silvercrest SKHD 1800 A1 Bedienungsanleitung

RP90873 Keramikheizlüfter LB6 Seite 10 Montag, 24. Juni 2013 4:54 16
2. Select the low or high heat setting on the
function selector 1 (see "7.2 Selecting
functions" on page 9).
7.8 Fan function
1. Select the fan function
selector 1.
Fault
Appliance cannot be Faulty fuse or wall socket
switched on
Faulty appliance
Appliance switches off Safety switch has triggered
automatically
Thermal cut-out has triggered
Only cold air is produ- Selected temperature has been
ced reached
9.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be
disposed of to a sorted rubbish
collection. This applies to the
product and all accessories which are
10
2. Set the temperature selector 2 to
"MAX".

7.9 Transporting the appliance

If you wish to transport the apliance, always
carry it by the lift-up carry handle 4.
on the function

8. Troubleshooting

Cause
Select another wall socket
Have repairs carried out at a specialist
workshop or dispose of the appliance. You
will find the service address in "10. HOYER
Handel GmbH Warranty" on page 11.
Set the appliance upright (see "7.6 Safety
switch" on page 9)
Allow the appliance to cool down (see
"7.5 Thermal cut-out" on page 9)
Clean the appliance (see "6. Cleaning" on
page 8)
Appliance switches on again automatically
as soon as the room temperature falls
Select a higher desired temperature

9. Disposal

marked with this symbol. Marked products
must not be disposed of via the regular
domestic waste but must be handed in to a
recycling centre for electrical or electronic
devices. Recycling helps to reduce the use of
raw
environment. It is therefore imperative that
you
applicable in your country.
Remedy
materials and to relieve
follow the disposal
the
regulations