Werbung
Verfügbare Sprachen
Verfügbare Sprachen
■
GB
Introduction
Congratulations!
With your purchase you have decided in favour of a
quality product. Familiarise yourself with the product
before taking it into use. To do this, read the following
operating instructions attentively. Use the product only
as described and only for the specified areas of appli-
cation. Retain these instructions for future reference. In
addition, pass these documents on, together with the
product, to any future owner.
Intended use
The storage set is intended exclusively for the storage
of tools and small parts such as nails, wallplugs, screws
or similar items, in private households. This storage set
is not intended for the storage of flammable, toxic or
corrosive liquids. Do not use this storage set in or for
commercial applications, or for purposes for which
it was not intended. A different or additional usage
is considered to be improper use and can lead to
damage. The manufacturer assumes no responsibility
for damage caused by failure to comply with these in-
structions, improper use, incompetent repairs, making
unauthorised modifications or for using unapproved
replacement parts.
safety instructions
For safe interaction with the item pay heed to the
following safety information:
■
When drilling, ensure that damage is not caused
to any electrical cables or other installations, such
as water pipes, in the wall. Drilling into electrical
wires can be fatal!
■
Damaged parts could have sharp edges. There is
also a risk of physical injury! Replace broken or
Kompernass Handels GmbH
damaged parts forthwith.
BURGSTRASSE 21
■
Do not burden the wall panels and the boxes too
44867 BOCHUM
heavily (see chapter "Technical Data"). This could
DEUTSCHLAND / GERMANY
lead to irreparable damage.
www.kompernass.com
■
The supplied wallplugs are only suitable for inser-
tion into a concrete or stone wall. It is absolutely
B
Stand der Informationen · Last Information Update:
important that you check the suitability of your ma-
11 / 2014 · Ident.-No.: POAS2B1-112014-1
sonry before inserting the wallplugs. If you do not,
the wallplugs may not hold and the wall panels
could fall off. If in doubt, consult a professional.
IAN 103875
1
technical data
Maximum load per wall panel
Maximum load - small box
Maximum load - medium box
1.5 kg
Maximum load - large box
Items supplied
Before taking the item into use, check that all of the
parts are complete/available and free of visible
damage. If the items supplied are not complete, or
damaged due to defective packaging or through
transportation, contact Customer Services (see chap-
ter "Importer/Service").
▯
2 x Wall panels (42 x 59 cm)
▯
12 x Boxes small (red) (11.5 x 10 x 7.3 cm)
▯
8 x Boxes medium (blue) (16.5 x 10 x 7.3 cm)
▯
4 x Boxes large (yellow) (21.5 x 10 x 7.3 cm)
▯
1 x broad box (blue) (8.3 x 28.3 x 6.5 cm)
▯
12 x Hooks (5 cm)
▯
1 x Drill and bit holder (16.5 x 5 cm)
▯
1 x Ring and open-ended spanner holder
(21.8 x 6.8 cm)
▯
1 x spray can holder (8.5 x 23 x 6.5 cm)
▯
1 x pen box (Ø 3.9 x 7 cm)
▯
40 x Screws M5 x 30
▯
40 x Wallplugs S6
▯
This information sheet
Assembly
Installing the wall panels
▯
Draw a straight line on the wall so as to align the
wall panels with it (see Fig. 1).
▯
Hold the wall panels against the wall and, using
a pointed object, mark the boreholes through the
screw positions.
▯
Drill the holes and insert the supplied plugs into
them.
▯
Screw the wall panels to the wall with at least 10
screws each (see Fig. 2).
- 6 -
- 7 -
32 kg
1 kg
2 kg
Fig. 3
securing the hooks
For 10 hooks you need at least two slots. Up to five
hooks can be attached to one slot.
▯
Fig. 1
securing the drill and bit holder
For the drill and bit holder you need two adjacent slots.
▯
securing the ring and open-ended spanner
holder
For the ring and open-ended spanner holder you
need two slots lying adjacent to each other and five
slots one above the other.
▯
Fig. 2
Mounting the boxes
You will need a free slot in the wall panels for a box
Attaching the spray can holder
(small/medium/large). For the broad box, you will
For the spray can holder, you will need three adjacent
need two adjacent slots.
slots.
▯
Insert the box from above into the open slot such
▯
that both/three hooks engage in the wall panels
(see Fig. 3).
Attaching the pen box
For the pen box, you need one free slot in the wall
panels.
▯
- 8 -
Insert the hook from above into the slot (see Fig. 4).
Fig. 4
cleaning
Insert the drill and bit holder from above into the
IMPOrtAnt
slots such that both hooks engage in the wall
►
Do not use abrasive or aggressive cleaning
panel (see Fig. 4).
agents, these could damage the plastic parts.
▯
Clean the wall panels and the boxes with a lightly
moistened cloth. For stubborn soiling use a mild
detergent on the cloth.
disposal
Insert the two ring and open-ended spanner hold-
Dispose of the appliance via a registered waste dis-
ers from above into the slots such that both hooks
posal firm or at your local community waste disposal
engage in the wall panel (see Fig. 4).
facility. Pay heed to the currently applicable regula-
tions. In case of doubt, please contact your waste
disposal centre.
Dispose of all packaging materials in an
environmentally friendly manner.
Insert the tool holder from above into the slots
such that three hooks engage in the wall panels
Importer / service
(see Fig. 4).
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
Tel.: +49 (0) 2327 3018-0
Insert the pen box from above into the open slot
www.kompernass.com
such that the hook engages in the wall panels
IAN 103875
(see Fig. 4).
- 9 -
- 10 -
Werbung
