Steam Cooking; Cleaning; Housing; Crumb Tray - Clatronic TAM 3688 Bedienungsanleitung, Garantie

Steam Cooking

3. Insert the pan, if necessary.
4. Fill the pan with 100 ml of water.
5. First, install the egg holder and then the steam cooking
attachment.
6. Place the food to be cooked onto the steam cooking
attachment and put on the lid.
WARNING:
• Pull the mains plug out of the mains socket before you clean the
appliance and allow the appliance to cool down.
• Do not immerse the appliance in water! Doing so may result in
an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use abrasive or aggressive cleaners.

Housing

Only use a slightly damp cloth to clean the outside of the
appliance.

Crumb Tray

The crumb tray is located under the slide lever.
1. Remove the crumb tray by pressing it in. The crumb tray
will audibly disengage.
2. Remove the bread crumbs.
3. Reinsert the crumb tray back into the appliance. It must
audibly engage.
Egg Holder, Steam Cooker Attachment, Poaching
Insert, Lid, Bread Roll Attachment and Spatula
• Clean these parts manually in soapy water.
• Rinse under clear water and dry afterwards.

Pan

CAUTION:
• Do not submerge the pan in water!
• Ensure that no water comes into contact with the
contacts of the pan.
• Do not wipe out the inside of the appliance!
1. Remove the pan.
2. Wipe out the pan with a damp sponge.
3. Only reinsert the pan once it has dried thoroughly.
Check the proper seating of the pan.
54
TAM3688_IM
7. Switch on the appliance. Set the on / off switch to the
"HEAT" position.
NOTE:
If the simmering food is still too raw, even after all the
water evaporated, proceed as described in chapter
"The Egg Boiler / Steam Cooker"
Protection".

Cleaning

Decalcification (Pan)

• The decalcification intervals depend on the hardness of
the water and the frequency of use.
• If the appliance switches off before the water boils, it
probably needs to be decalcified.
• Do not use vinegar, but a normal citric acid-based decal-
cifier. Follow the manufacturers' instructions!
WARNING:
As the housing and the metal parts become hot during
operation, allow the appliance to cool down before putting
it away.
• Wind the power cord at the bottom of the appliance.
• Clean the appliance as described and allow to dry
completely. We recommend to keep the appliance in the
original packaging if the appliance will not be used for
long periods.
• Always keep the appliance out of the reach of children in
a dry, well ventilated place.
"Overheating

Storage

12.03.18