Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
lf
this device will be operated in any way different to the one described in this manual,
the
product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
INSTALLATION
Before attaching
the
device, make sure that
the
installation area can hold
a
minimum point load
of
10
times
the device's weight.
The
device must
only be
installed absolutely planar
at
a
vibration-free, oscillation-free and
fire-resistant
location. Make sure that the devlce is installed absolutely planar by using
a
water-level.
Please note:
The device must be installed out
ofthe
reach of people.
The device must always be
installed
via all fixation holes. Do only use
appropriate
screws and
make sure
that the screws are properly connected with the ground.
The durability of the installation
depends
very much on the material used at the installation area
(building
material) such as
wood,
concrete, gas concrete, brick etc.
This
is
why
the
fixing
material must be chosen to
suit the
wall
material. Always ask a specialist for
the
correct plug/screw combination indicating
the
maximum
load and the building material.
Procedure:
Step
1: The hole for the installation is on the mounting bracket.
Step 2:
Hold
the
base mounting bracket onto the location where the device
is
to be installed
Step 3:
Mark
the
boreholes with a pen or a suitable tool.
Step 4:
Drill the holes.
Step 5:
Hold the mounting bracket
in
the desired position and
tighten
it.
,/\
DANGERToLTFE!
-
! \
Betore taking into op€ration for the
first
time, the installation
has
to
bè
approved by
an
expert!
OPERATION
After connecting the Spot to the mains,
the
EUROLITE LED PST-3W starts running.
CLEANING
AND MAINTENANCE
DANGER TO LIFE!
Disconnect
from
mains before
starting
maintenance operation!
We
recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside
the
device. Maintenance and service operations are only
to
be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
lf the
power supply cable of this device becomes damaged,
it
has
to
be replaced by authorized dealers only
in
orderto
avoid hazards.
11t12
00047288.DOC. Version
1.0
Werbung
Inhaltsverzeichnis
