Renkforce RF-PCL-MESH2.1 Bedienungsanleitung Seite 3

Operating instructions
PC speaker RF-PCL-MESH2.1
Item no. 1577044
Intended use
The product is used to transform electrical audio signals into audible sound waves.
The product is suitable for connection to a PC audio output only. Power supply is via
the mains supply unit included in delivery.
This product is intended for indoor use only. Do not use it outdoors. Contact with
moisture (e.g. in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product.
Using the product for purposes other than those described above may damage the
product. In addition, improper use can cause hazards such as a short circuit, fire or
electric shock. Read the instructions carefully and store them in a safe place. Make
this product available to third parties only together with its operating instructions.
This product complies with statutory national and European regulations. All company
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• PC speaker (pair)
• Subwoofer
• Power supply (9 V / 1.5 A)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan
the QR code on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to
your health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating
instructions. Always read this information carefully.
This symbol indicates special information and advice on how to use the
product.
Safety instructions
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we will assume no
liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and
prevent unauthorized use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a
low height may damage the product.
• Always observe the safety and operating instructions of any other
devices which are connected to the product.
• Do not listen to excessively loud music over an extended period of time.
This may damage your hearing.
• The mains outlet must be located near to the device and be easily
accessible.
• Only use the supplied mains adapter as a power supply.
• Only connect the power adapter to a normal mains socket connected to
the public supply. Before plugging in the power adapter, check whether
the voltage stated on the power adapter complies with the voltage of your
electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the
cable; always use the grips on the plug.
• When setting up the product, make sure that the cables are not pinched,
kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled
in them. This may cause an injury.
• For safety reasons, disconnect the power adapter from the mains socket
during storms.
• Do not touch the power adapter if there are any signs of damage, as
this may cause a fatal electric shock! First, switch off the mains voltage
to the socket to which the mains adapter is connected (switch off at the
corresponding circuit breaker or remove the safety fuse, and then switch
off at the corresponding RCD protective switch, so the socket is fully
disconnected). You can then unplug the power adapter from the mains
socket. Dispose of the faulty power adapter in an environmentally friendly
manner and discontinue use. Replace it with a power adapter of the
same design.
• Never pour any liquids over electrical devices or place objects filled with
liquid next to the product. If liquid or an object does enter the interior
of the device, power down the respective socket (e.g. switch off the
circuit breaker), and then remove the mains plug from the mains socket.
Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated may destroy the
product. The power adapter may also generate a fatal electric shock!
Allow the product to reach room temperature before connecting it and
putting it to use. This may take several hours.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or
an authorized repair centre.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.