Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER MANUAL
VOCAL MICROPHONE
Universal
Dynamic Microphone
The OMNITRONIC
designed for
stage and studio applications and is ideally suited for speech and vocals
microphone is supplied with an XLR/jack cable.
Safety Instructions
Ÿ
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Ÿ
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Setting into Operation
Connect the microphone via the supplied cable to the XLR microphone input of your audio unit (e.g.
mixing console). The microphone and the cable are balanced, the 6.3 mm jack is unbalanced. To
switch on the microphone, set the sliding switch to the lower position.
Cleaning
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Technical Specifications
Type:............................Dynamic
Directivity pattern: ........Cardioid
Frequency range:.........100 Hz - 14 kHz
Impedance:..................600
Sensitivity: ...................-73 dB
Connector: ...................3-pin XLR, bal.
Cable: ..........................3-pin XLR, bal./6.3 mm jack, unbal.
Weight: ........................500 g
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
VM-250 S PRO
W
is a dynamic microphone with cardioid characteristic
VM-250 S PRO
. The
00052434.DOC, Version 1.0
www.omnitronic.com
Werbung
