At A Glance (Reverse) - ADE CK 1604 Bedienungsanleitung

BEWARE of material damage
‚ Protect the clock from strong impacts and vibrations.
‚ Remove the battery from the product if it is exhausted or if you will not use the
clock for an extended period of time. You will thus avoid damage that may result
from the leakage of battery acid.
‚ Pay attention to the correct polarity (+/-) when inserting or changing the battery.
‚ Do not expose the battery to any extreme conditions, e.g., by storing it on a heater
or in direct sunlight. Increased risk of leakage!
‚ Clean the battery and device contacts, as needed, before inserting the battery.
‚ Do not make any modifications to the scales. Only allow repairs to be carried out
at a specialist workshop. Repairs carried out incorrectly can considerably endanger
the user.

At a glance (reverse)

M.SET button – Set the time manually
1
RESET button – Reset the clock to factory settings
2
REC button – Restart the radio transmission
3
Transportation safety pin
4
Battery compartment
5
Radio Wall Clock CK 1604
1
2
Safety
3
4
5
15