HEINE mini 2000 Gebrauchsanweisung Seite 2

HEINE
®
mini 2000
93/42/EWG/CEE/EEC
Warranty
We guarantee this device (except bulbs) for five years from date of purchase. We guarantee the
proper function of the unit provided it is used as intended by the manufacturer and according to the
instructions for use. Any faults or defects which occur during the guarantee period will be repaired
free of charge provided they are caused by faults in material, design or workmanship. In the case of
a complaint of a defect in the product, the buyer must prove that any such defect was present at
the time the product was delivered. This guarantee excludes any defects which occur because of
wear and tear, incorrect use, the use of non-original HEINE parts, (especially bulbs, as these are
designed with emphasis on the following criteria: Color temperature, life expectancy, safety, optical
quality and performance). Also excluded are repairs or modifications made by persons not authorised
by HEINE or cases where the customer does not follow the instructions supplied with the product.
Further claims, in particular claims for damage not directly related to the HEINE product, are excluded.
For repairs, please contact your supplier, who will return the goods to us or our authorized agent.
Bought at
Date
Instructions for use
Read these instructions carefully before using the HEINE mini 2000 ® battery handle and
keep them in a safe place for future reference.
In accordance with local regulations this product
should be disposed of as an electronic device separately .
HEINE mini 2000 ® battery handle
1
Range of applications:
The HEINE mini 2000 ® battery handle should
only be used to power HEINE mini 2000 ® and
HEINE alpha ® instruments.
Batteries:
2 alkaline cells (AA /LR6)
Instrument connector:
Internal thread in handle head (1)
Switching on:
Push switch (2) down – a red "on" indicator
comes into view.
Switching off:
Push switch (2) up. If the handle is put back
firmly into a coat pocket the handle is
automatically switched off.
Changing the batteries:
Unscrew the end-cap (3) and shake out the old
batteries. Insert new batteries with the plus
contact facing the handle head.
Cleaning:
Wipe with a soapy cloth or a little alcohol.
3
®
HEINE mini 2000 Ophthalmoscope
Range of applications:
The HEINE mini 2000 ® ophthalmoscope is designed for examination of the eye.
During examination, hold the instrument with your index finger on the lens wheel (1). You can also
operate the aperture wheel (3) in this way.
Window (2) shows the selected lens value. Minus lenses are shown red, plus lenses black.
Changing the bulb
Unscrew the instrument from the handle and pull the bulb (4) downwards. Wipe the new bulb glass
clean and insert it so that the locating pin (5) fits the slit.
Cleaning
The housing can be wiped clean with a cloth moistened with alcohol. Glass surfaces can be
cleaned with a cotton wool bud in the same way.
Spare Parts
HEINE XHL ® Xenon halogen spare bulb
1
1
2
4
5
ENGLISH
®
HEINE mini 2000 Focalux hand lamp
Range of applications:
The HEINE mini 2000 ® Focalux hand lamp is designed
for illuminating the oral cavity, the throat, nose, skin
surface and for examining the anterior segment of the
eye. When combined with an ophthalmoscopy lens it
can be used for indirect ophthalmoscopy.
Method of operation
Attach the instrument to a handle.
Switch on the illumination and direct the light emerging
from the prism (7) onto a white surface.
Using the slide (1) you can adjust the focusing of the light
from parallel (slide at bottom) to convergent rays.
Use of magnifying lens +3D
The lens is mounted on the cylindrical part (8) of the hand
2
lamp. Ensure that the shoulder (5) of the lens ring (6) is
pointing upward.
The lens enables the presbyopic examiner to carry out
examinations in comfort and produces a magnified fundus
image. Always position the lens at the center of the hand
lamp.
Changing bulbs
Please note: The performance of this instrument can
only be guaranteed if genuine HEINE bulbs are used.
Remove the instrument from the handle.
Grip the collar (4) of the bulb between your thumb and
index finger nails and remove the bulb by pulling it
downward.
Wipe the dome of the new bulb on a clean cloth and then insert it so that the adjusting pin (4) fits
into the recess (2).
Cleaning
The instrument can be wiped with a cloth dipped in alcohol. Use a cotton wool bud with alcohol
for the glass surfaces.
Spare parts
HEINE XHL ® Xenon halogen spare bulb
3 Dpt lens
®
HEINE mini 2000 tongue-blade holder
Range of applications:
The HEINE mini 2000 ® tongue-blade holder should only be used to illuminate the oral cavity and
throat.
Fitting and ejecting the tongue-blade:
Push the HEINE disposable tongue-blade into the holder (3) until it clicks in. Press the trigger (4)
to eject.
Changing the bulb
Unscrew the cover (1) and pull out the bulb (2). Insert a new bulb and screw in the cover again.
Cleaning
Wipe clean with cleaning or disinfectant solution. Do not soak or autoclave.
Accessories and spare parts
HEINE XHL ® Xenon halogen spare bulb
X-01.88.042
Pack with 100 HEINE disposable tongue-blades
3
®
HEINE mini 2000 otoscope
®
HEINE mini 2000 F.O. otoscope
Range of applications:
The HEINE mini 2000 ® otoscopes should only be used to examine the external ear and for general
non-invasive examination.
Safety in use:
The otoscope should only be used to examine the ear when a tip is fitted. Pressure should be
5 applied with great care when doing pneumatic testing.
6
Use
Attaching a tip:
7
The otoscope may only be inserted into the auditory canal when a disposable (grey) or reusable
(black) tip is fitted.
8 Push the tip onto the instrument so that the internal projection engages in the slit (1). Twist to the
right to lock.
Magnifying lens:
1
The lens (2) magnifies ca. 3x and can be swivelled aside for instrumentation.
Insufflation port:
An insufflation bulb can be fitted to the port.
2
General illumination:
The otoscope can be used with or without a tip for general illumination of e.g. the oral cavity or
skin. Avoid contact with sensitive or damaged skin.
4
3 Changing the bulb
Swivel the lens (2) to one side and simply pull the bulb backwards out of the head.
Push in a new bulb.
®
With the HEINE mini 2000 F.O. otoscope, first unscrew the head from the handle and pull the
bulb (3) downwards. Push in the new bulb.
Cleaning and Sterilization
Otoscope head: Clean the outside with a soft cloth, inside with a cotton wool bud, if necessary
soaked in alcohol. Gas sterilization is permitted. Do not soak.
Reusable SANALON S tips: These can be cleaned, disinfected and sterilized or boiled by any
conventional method. Autoclaving is permitted.
AllSpec-Tips: Are for single use only. Do not attempt to clean them as the tip may be damaged
X-01.88.042
and could injure the patient.
C-00.14.109
Spare parts and accessories
Reusable SANALON S tips
1 set = 4 pcs.
AllSpec disposable tips
Pack of 1000 pcs., distal dia 2,5 mm
same, distal dia 4 mm
AllSpec Tip-Dispenser
HEINE XHL ® Xenon halogen spare bulb – mini 2000 otoscope
HEINE XHL ® Xenon halogen spare bulb – mini 2000 F .O. otoscope
Insufflation bulb for mini 2000 F.O. otoscope
X-01.88.037
B-00.12.304
Please note:
The performance of this instruments can only be guaranteed if genuine HEINE bulbs are
used.
B-00.11.111
B-00.11.128
B-00.11.127
B-00.11.145
X-01.88.056
X-01.88.037
D-00.80.102