Speed System Adjustment - Team 5 GREEN Betriebsanleitung

SPEED SYSTEM ADJUSTMENT

The speed system must be properly adjusted for the pilot and harness in order to guarantee the
full acceleration distance.
First of all, the risers must be attached to the harness karabiner and the cords must be attached
to the speed system on the riser using the C-clips. The risers must be extended to simulate the
position in flight, while the pilot sits in the harness. It is useful to have a second person around
who assist.
Speed system adjustment: run
cord through pulley to footbar
Now the footbar can be attached to the ends of the cords using knots. The adjustment should be a
compromise between "sufficiently long" to be able to "step in" while gliding and "short enough" so
that foot path is still possible, which is necessary for the full range of acceleration.
The C-clips can be unfastened to allow the paraglider being removed from the harness after land-
ing without having to re-adjust the speed system before the next flight.
0
De En Fr
Handbuch Green Susi 100 Seiten.i50 50 06.09.2007 11:13:52