Cleaning And Maintenance; Cleaning The Shaver In The Smartclean System - Philips S91XX Bedienungsanleitung

Do not use the appliance on damaged or irritated skin or on wounds.
1 Attach the attachment to the appliance ('click') (Fig. 33).
2 Moisten the attachment with water (Fig. 34).
Note: Do not use the appliance with a dry brush attachment,
as this can irritate the skin.
3 Moisten your face with water and apply a cleanser to your face
(Fig. 35).
4 Place the attachment on your cheek.
5 Switch on the appliance.
6 Gently move the attachment across your skin from the nose
towards the ear (Fig. 36). Do not push the attachment too hard
onto the skin to make sure the treatment remains comfortable.
Do not cleanse the sensitive area around your eyes.
7 After approx. 20 seconds move the appliance to your other cheek
and start cleansing this part of your face (Fig. 37).
8 After approx. 20 seconds move the appliance to your forehead
and start cleansing this part of your face. Gently move the brush
head from left to right (Fig. 38).
Note: We advise you to not overdo the cleansing and to not
cleanse any zone longer than 20 seconds.
9 After the treatment, rinse and dry your face (Fig. 39).Your face is
now ready for the next step of your daily skincare routine.
10 Clean the attachment after use (see 'Cleaning and maintenance').

Cleaning and maintenance

Note: The accessories supplied may vary for different products.
The box shows the accessories that have been supplied with your
appliance.

Cleaning the shaver in the SmartClean system

The SmartClean system comes in two types. The features available
on your SmartClean system differ per type:
-
SmartClean system Basic has one phase: the rinsing phase (Fig. 40).
-
SmartClean system Plus has two phases: the rinsing phase and the
drying phase (Fig. 41).
21
English