Cleaning The Shaver Under The Tap; Cleaning The Click-On Attachments - Philips S91XX Bedienungsanleitung

24
English

Cleaning the shaver under the tap

Clean the shaver after every shave for optimal performance.
Caution: Be careful with hot water. Always check if the water is not
too hot, to prevent burning your hands.
Never dry the shaving unit with a towel or tissue, as this may
damage the shaving heads.
1 Switch on the shaver.
2 Rinse the shaving unit under a warm tap (Fig. 22).
3 Switch off the shaver. Pull the shaving head holder off the bottom
part of the shaving unit (Fig. 52).
4 Rinse the hair chamber under the tap (Fig. 53).
5 Rinse the shaving head holder under a warm tap (Fig. 54).
6 Carefully shake off excess water and let the shaving head holder dry.
7 Attach the shaving head holder to the bottom part of the shaving
unit ('click') (Fig. 55).

Cleaning the click-on attachments

Never dry trimmer or beard styler attachments with a towel or tissue,
as this may damage the trimming teeth.
The accessories supplied may vary for different products. The box
shows the accessories that have been supplied with your appliance.
Cleaning the trimmer attachment
Clean the trimmer attachment every time you have used it.
1 Switch on the appliance with the trimmer attachment attached.
2 Rinse the attachment under a warm tap (Fig. 56).
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the attachment dry.
Tip: For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.