Entering Characters and Numerals
Perform the following steps to enter characters and numbers using the remote
control.
1. Move the cursor to the item to input, and press the [Enter] button. The cursor
turns green to indicate you are in input mode.
2. To enter numbers, use the numeric keypad
while holding down the [Num].
The [Num] button lights up and the remote
control buttons change to numeric keypad
mode so that you can enter numbers.
To enter a period (.) press the [
characters can be input.
Tilt the [
] button up to select individual
characters or numbers in the following order:
A-Z → 0-9 → symbols → a-z → space.
Tilt the [
] button down to select them in
reverse order.
To set your target character quickly, press
and hold the [
through characters.
3. To input subsequent numbers or characters, tilt the [
first number or character is selected and the cursor moves to the second entry
position.
4. After you have entered all the characters, press the [Enter] button to finalise the
entry. The cursor will turn yellow.
] button
] button to rapidly advance
Remote control
Period
The buttons inside the box will
switch to numeric keypad mode
while the [Num] button is lit.
] button to the right. The
Numeric
buttons
25