Receiving A Call; Putting A Call On Hold - Topcom Sologic A811 Bedienungsanleitung

Sologic A811
8 Operation
8.1 Making a call
• Enter the telephone number.
• Press to delete a wrongly entered digit.
• Pick up the handset or press
make a hands-free call.
The volume of the handset can be set to
HI or LO by using switch
During a call made with the handset you
can switch to hands-free by pressing
and hanging up the handset.
The hands-free volume can be adjusted
using the volume button
In case the telephone is connected to a
PBX system it might be necessary to add
a pause after the PBX access code. The
phone can generate a 4 second pause
time.
Example: 0 P 012345678
– Press
The call duration timer will start in the display 6
seconds after the number was dialled.
8.2

Receiving a call

• When a call comes in, the phone will ring and
the ringer LED will blink.
• Pick up the handset or press
call hands-free.
8.3 Deactivating the microphone
During a call you can deactivate the microphone
and talk freely without the caller hearing you.
• Press and hold
8.4

Putting a call on hold

During a call you can put the caller on hold. During
this time the caller will hear an electronic melody.
• Press during the conversation and hang-
up the handset.
The other party will be on hold
• To continue the conversation, pickup the
handset or press
8.5 Last number redial
The phone will store the 16 latest dialed numbers
together with the call duration.
6
or
24 .
9 .
to enter a pause.
to take the
to mute the microphone.
for hands-free mode.
• Press
numbers ("
• Pick up the handset or press
make a hands-free call.
to • Press
8.6 Incoming Caller ID list
The phone can store up to 158 incoming numbers
(depending on the length of the number) together
with the time and date of the call.
• Press
numbers ("
• Press
Secret numbers will be displayed as
"
-------------------- UNAVAILABLE
The LED will blink when you have new
missed calls. Missed calls will be
displayed together with "
• Pick up the handset or press
make a hands-free call.
If a long distance code (see "7.5 Long
distance code (prefix)") is programmed,
you can add this code automatically by
pressing
For example:
Long distance code: 1234
Number in the caller ID list: 012345678
• Press
The number dialled by the phone is
1234012345678
8.7 VIP numbers
In the incoming number list you can set special
numbers as VIP (Very important person).
VIP numbers cannot be deleted from the incoming
caller ID.
• When browsing the incoming number press
VIP
to set the number as VIP. "
appear in the display together with the
number.
VIP
• Press
to go through your latest dialed
" will appear in the display).
OUT
twice to delete a number.
/ to go through the incoming
" will appear in the display).
IN
twice to delete a number.
".
".
NEW
twice to dial the number.
twice.
again to unselect VIP.
or to
or to
" will
VIP
Sologic A811