Noise Development; Technical Data; Disposal - Clatronic BS 1288 Bedienungsanleitung

CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Storage
• Let the device cool down completely.
• Wind the cable completely.
• Please insert the hook of the floor nozzle into the parking
assistant on the rear of the device.
• If you want to stand the appliance vertically: Hook the floor
nozzle onto the stowage clip on the bottom of the appli-
ance.
Troubleshooting
• The Device Does Not Work.
Remedy:
Check the connection to the mains.
• The device does not suck up anything.
Possible Cause:
The suction power is set too low.
Remedy:
Check the position of the control.
Possible Cause:
The dust bag is full.
Remedy:
Renew the dust bag.
or
Possible Cause:
The filters are dirty.
Remedy:
Clean the components.
Possible Cause:
There is a foreign body in the suction tube or the nozzle.
Remedy:
Check the accessories for foreign bodies.

Noise development

The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 77 dB(A) (no limit)
28

Technical Data

Model: ..............................................................................BS 1288
Power supply: .........................................................230 V~, 50 Hz
Power consumption: ........................................................... 800 W
Dust filter bag: ............................................SSB 101 / Swirl Y 101
Protection class: .......................................................................... II
Net weight: .........................................................................6.10 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations

Disposal

Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed
of can be obtained from your local authority.