Set Emissivity; Choose The Temperature Unit; Display Min / Max Values - PCE Instruments PCE-TC 28 HVAC Bedienungsanleitung

5.3.1

Set emissivity

1. Press the "Menu" key to open the menu.
2. Press the ▲ and ▼ keys to choose EMS.
3. Press the "Enter" key.
4. Press the ▲ and ▼ keys to set the emissivity and
confirm by pressing the "Enter" key.
5.3.2

Choose the temperature unit

1. Press the „Menu" key to enter the menu.
2. Press the ▲ and ▼ keys to choose UNIT.
3. Press the "Enter" key.
4. Use the ▲ and ▼ keys to choose between °C or °F.
Confirm your selection by pressing the "Enter" key.
5.3.3

Display Min / Max values

1. Press the "Menu" key to enter the menu.
2. Use the ▲ and ▼ keys to select MXMN.
3. Press the "Enter" key.
4. Press the "Enter" key to show the maximum and
minimum value in the display.
© PCE Instruments