Bosch CTL636E Gebrauchsanleitung Seite 61

en
Problem
Coffee is too "acidic"�
Coffee is too "bitter"�
Coffee tastes burnt�
Coffee is too "weak"�
Ground coffee sticks in the
coffee drawer�
The water filter does not
stay in position in the water
tank�
Bean container sticks when
inserting�
The coffee grounds are not
compact and are too wet�
Cause
The grinding level is too
coarse� Preground coffee is
too coarse�
Unsuitable type of coffee�
Coffee is ground too finely.
Preground coffee is too fine.
Unsuitable type of coffee�
The brewing temperature is
too high�
Coffee is ground too finely.
Preground coffee is too fine.
Unsuitable type of coffee�
Coffee strength selected is
too weak�
Ground coffee jammed in the
coffee drawer�
Ground coffee sticks together� Do not press the ground
Coffee drawer is damp�
The water filter is not mounted
correctly�
There are beans in the
housing�
The grinding setting is too fine
or too coarse, or not enough
ground coffee has been used�
Solution
Adjust the grinding unit to
a finer setting. Use a finer
ground coffee�
Change the type of coffee�
Adjust the grinding level
to a coarser setting� Use a
coarser ground coffee�
Change the type of coffee�
Reduce the temperature,
see the section "Drink
adjustment"�
Adjust the grinding level
to a coarser setting� Use a
coarser ground coffee�
Change the type of coffee�
Raise the strength of the
coffee, see the section "Drink
adjustment"�
Remove the ground coffee
drawer, clean and dry
thoroughly�
coffee firmly into the coffee
drawer�
Remove the ground coffee
drawer, clean and dry
thoroughly�
Firmly press the water filter
straight down into the tank
connection�
Remove the beans.
Adjust the grinding unit to
a coarser or finer setting,
or use 2 level measuring
spoons of ground coffee�
CTL636E.. | 07/2014
57