Hama Quick Charge Bedienungsanleitung Seite 3

Note
• When using this product, observe the applicable local traffic laws and regulations.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are
not blocked or restricted.
4. Startup and Operation
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the power output of the charger can supply
sufficient power for the device.
• In principle, all terminal devices whose power consumption does not exceed 2000 mA can be charged.
Terminal devices that support Quick Charge 2.0 charge considerably faster.
• Please refer to the instructions in the operating manual of your terminal device.
• Plug the charger into a car socket in the vehicle electrical system.
• Connect the terminal device to be charged to the USB port using the Micro-USB cable included or using a
suitable USB cable.
• The function LED lights up in different colours depending on the charging voltage.
Green
Yellow
White
• Disconnect all cable and mains connections after use.
Note
• For some vehicle types, the ignition has to be switched on to supply power to the car socket. For more
information, please refer to your vehicle's manual.
5V
9V
12V
3