Fritel Frytastic Turbo SF System Gebrauchsanweisung Seite 29

the aggressive chemicals used in the cleaning products.
-Clean the basket in hot water with detergent with a washing-up brush. NEVER
let the basket soak in the water to avoid rusting.
3. If you want to clean your deep fryer quickly, easily and safely, we advise you to
use the FRITEL cleaner for fryers. Fill the bowl of the deep fryer with warm
water at + 40°C and add about 10 caps of FRITEL cleaner for fryers. The
product must soak in for +/- 20 minutes, then empty the bowl. Rinse thoroughly
and wipe with a soft towel. The FRITEL cleaner for fryers contains natural
enzymes. So it's environment-friendly, biodegradable and non-toxic. The FRITEL
cleaner for fryers can be applied to all materials like stainless steel, synthetic,
enamel, etc.
5. TIPS IN CASE OF MALFUNCTION
If you observe one of the troubles below, do not use the appliance. Go through the
following check-list:
1. The control lamp flashes or the deep fryer cannot be switched on/off:
 Pull the plug and put it back in
 Try again
2. No temperature lights up
 Turn the thermostat knob once again to the desired temperature (fig.B).
 Push the thermostat knob to confirm.
3. The safety thermostat blows :

Let the deep fryer cool down first, then press the reset buttons (16).
The deep fryer is ready to be used again.
4. The deep fryer does NOT heat up :
 The safety thermostat is interrupted: Press the 2 reset buttons (16)
 The micro switch is interrupted: The control panel is not mounted
correctly onto the sliders, the bowl is mounted falsely, or one of the
sliders has broken off. In the first two cases: mount the fryer correctly.
In the last case: note the data in the cord storage, then go to your
sales point.
5. The oil smokes or boils over :
 The oil/fat is old or degraded: Replace the oil/fat
 The chosen temperature is too high : Choose a lower temperature
 The fried food contains too much water or contains too much redundant
ice.
6. The fried food is too greasy :
 The oil/fat is old and degraded: Replace the oil/fat
 The chosen temperature is too low : Choose a higher temperature
7. If the supply cord is damaged,
 Immediately bring your deep fryer to your sales point.
If you still haven't solved the trouble, please contact your sales point.
29