Cleaning And Maintenance - Fritel Frytastic Turbo Sf System Gebrauchsanweisung

4. CLEANING AND MAINTENANCE

4.1. Changing the solid fat
We recommend changing it right after the use of the deep fryer, when the fat is still
liquid. Let the fat cool down as long as possible. Then pour the fat in a receiver.
Caution: danger of burns, the frying fat is still hot! Be careful.
If you decide to change the fat after that it has solidified entirely, follow the steps
below:
1. Insert the plug in the socket.
2. Push the thermostat knob for 2 sec. (fig.A). The display will show « Turbo SF
System Activated » and a sound signal will be heard.
3. On the display following text will flash « Melting Solid Fat » (14).
4. Make some holes till the heating element with a wooden spoon in the fat (fig.
G).
5. Push the thermostat knob to confirm (fig. C). The red lamp (fig.D) lights up and
the fat will start melting. Caution: if you do NOT push the thermostat knob
within the 15 sec. the display will return to the previous setting.
Caution: NEVER leave the deep fryer unattended whilst working. When the fat
is liquid, switch off the appliance and pull the plug. First remove the basket and
then the control panel. Pour the melted fat carefully in a receiver. Don't throw
the fat away but bring it to the container park or a collection point.
6. Now clean the deep fryer: see point 4.3.
7. To add new frying fat: see point 3.1.2.
4.2. Changing the frying oil
1. Let the frying oil cool down to at least room temperature.
2. First remove the basket and then the control panel. Carefully pour the oil in a
recipient.
3. Don't throw the fat away but bring it to the container park or a collection point.
4.3. Cleaning
1. Remove the plug and let the deep fryer completely cool down before
disassembling it. First remove the basket, then the control panel with heating
element and then the bowl.
2. -NEVER immerse the control panel in water or any other liquid. Only clean it
with a damp cloth.
-Stainless steel housing, stainless steel lid and stainless steel bowl can be
cleaned in the dishwasher or in hot water with detergent. Nevertheless, we
recommend to clean the stainless steel parts in hot water with detergent,
considering the aggressive detergents used in the dishwasher may affect the
shine of the stainless steel.
-Synthetic housing and synthetic lid can both be cleaned in the dishwasher or in
hot water with detergent.
-Important: the painted metal housing and painted metal lid need to be cleaned
in hot water with detergent. In the dishwasher a discoloration may occur due to
28