Overview Of Models - Philips Perfect Care Xpress GC5060 Bedienungsanleitung

Problem
The iron leaves a shine
or an imprint on the
garment.
The iron produces a
pumping sound.
The iron produces a
loud pumping noise.
The iron steams
continuously when
placed horizontally on
the ironing board for
20-30 seconds.
Feature
OptimalTemp technology
Compact, powerful steam
generation technology
Blue Smart light
Constant steam output
Auto Steam Sensor
Soleplate
ECO button
Steam Boost
Constant vertical steam
Soft-grip handle
Water tank capacity (ml)
Anti-drip system
Safety Auto-off mode
360° swivel cord
Cord length (m)
Possible cause
The surface to be ironed was
uneven, for instance because you
ironed over a seam or a fold in the
garment.
Water is being pumped into the
steam chamber. This is normal.
There is no water in the water tank.
The ironing board did not provide a
good flat support and this activated
the Auto Steam Sensor in the iron.

Overview of models

GC5060
3
3
3
65g/min
3
SteamGlide
3
3
3
3
320
3
3
3
2.5
Solution
The iron is safe to use on all garments.
The shine or imprint is not permanent
and disappears when you wash the
garment. Avoid ironing over seams or
folds. You can also place a cotton cloth
over the area to be ironed to avoid
imprints.
If the pumping sound continues nonstop,
unplug the iron and contact the
Consumer Care Centre.
Fill the water tank (see chapter 'Using
the appliance', section 'Filling the water
tank').
Place the iron on its heel when you are
not ironing to prevent this problem.
GC5057 GC5055
3 3
3 3
3 3
65g/min 65g/min
3 3
SteamGlide SteamGlide
- -
3 3
3 3
3 3
320 320
3 3
3 3
3 3
2.5 2.5
ENGLISH
17
GC5050
3
3
3
50g/min
3
anodilium
-
-
3
3
320
3
3
3
2.5