Description Of The Components - Klauke HSG 45 Bedienungsanleitung

Instruction Manual HSG 45
_____________________________________________________________________________
4. Description of the hand-hydraulic cutting unit
The hand-hydraulic cutting unit type HSG 45 is a hand held tool and consists of
the following components:
Table 1 (see picture 1)
Pos.-No. Description
1 Locking pin
2 non moving
blade
3 Pump handle
4 Retract lever
5 Guiding handle handle to guide and position the tool
6 Turn screw
7 moving blade
Instruction manual HSG 45
___________________________________________________________________________
4. Description of the hand-hydraulic cutting unit

4.1. Description of the components

The hand-hydraulic cutting unit type HSG 45 is a hand held tool and consists of
the following components:
Table 1 (see picture 1)
Pos.-No. Description
1 Locking pin
2 non moving
blade
3 Pump handle
4 Retract lever
5 Guiding handle handle to guide and position the tool
6 Turn screw
7 moving blade
Function
device to open/close the cutting head
interchangeable swinging blade to cut copper,
aluminium and ACSR conductors
handle to operate the pump
lever to activate the pressure relief valve and
to return the blades into starting position.
to activate/de~ the transportation lock
connected to the piston to cut copper,
aluminium and ACSR conductors
Function
device to open/close the cutting head
interchangeable swinging blade to cut copper,
aluminium and ACSR conductors
handle to operate the pump
lever to activate the pressure relief valve and
to return the blades into starting position.
to activate/de~ the transportation lock
connected to the piston to cut copper,
aluminium and ACSR conductors
page 15
Reference
pp 19, 20
pp 19, 20
pp 19, 20,
24
pp 20, 24
p 19
pp 19, 20
pp 19, 21,
24
page 15
Reference
pp 19, 20
pp 19, 20
pp 19, 20,
24
pp 20, 24
P 19
pp 19, 20
pp 19, 21,
24