Technical Data; Intended Use - Bosch ART ACCUTRIM 2300 Originalbetriebsanleitung

OBJ_BUCH-2337-001.book Page 14 Tuesday, November 4, 2014 3:26 PM
14 | English
charger, may only use this charger
under supervision or after having
been instructed by a responsible
person. Otherwise, there is danger of
operating errors and injuries.
Products sold in GB only: Your prod-
uct is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket
outlets, it should be cut off and an ap-
propriate plug fitted in its place by an
authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.

Technical Data

Cordless Trimmer
Article number
No-load speed
Adjustable handle
Trimmer-head angle adjustment/edging adjustment
Cutting diameter
Weight according to EPTA-Procedure 01/2003
Serial number
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
F 016 L81 209 | (4.11.14)
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol Meaning
Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Audible noise
Accessories/Spare Parts

Intended Use

The machine is intended for the cutting of grass and weeds
under bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Intended use is related to operation within 0 °C and 40 °C
ambient temperature.
ART 23 ACCUTRIM/
ART 2300 ACCUTRIM
3 600 H78 E..
-1
min 9 500
cm
kg 2.9
See serial number (type plate) on the machine
ART 26 ACCUTRIM/
ART 2600 ACCUTRIM
3 600 H78 F..
9 500
 
 
23 26
2.9
Bosch Power Tools