Technical Data; Declaration Of Conformity; Intended Use; Noise/Vibration Information - Bosch AMW RT Originalbetriebsanleitung

OBJ_BUCH-1669-002.book Page 7 Thursday, October 24, 2013 3:47 PM
 Switch on the trimmer with hands and feet well away from
the rotating line.
 Do not put hands or feet near the cutting stick.
 Never fit metal cutting elements to this trimmer.
 Inspect and maintain the trimmer regularly.
 Have the trimmer repaired only by an authorized customer
service agent.
 Switch off and remove the plug from the socket:
– whenever you leave the machine unattended for any
period
– before replacing the cutting stick
– if the cable is tangled
– before cleaning or working on the trimmer
– before removing the trimmer attachment
– before changing the multi-tool attachment
 The extension pole may not be fittet to the power heavy duty
trimmer attachment.
 After use, disconnect the machine from the mains and check
for damage.
 Store the machine in a secure, dry place out of the reach of
children. Do not place other objects on top of the machine.
 Replace worn or damaged parts for safety.
 Only use Bosch approved cutting elements. Cutting per-
formance will vary with different cutting elements.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better and
safer manner.
Symbol Meaning
Wear protective gloves
Wear safety glasses/goggles
Always wear ear protection.
Reaction direction
Accessories/Spare Parts

Intended Use

This multi-tool attachment can only be operated by the power
unit AMW 10.
The machine is intended for the cutting of grass and weeds un-
der bushes, as well as on slopes and edges that can not be
reached with the lawn mower.
Bosch Power Tools

Technical Data

Heavy duty trimmer
Article number
Length, cutting sticks
Cutting diameter
Weight according to
EPTA-Procedure 01/2003
without power unit
Protection class
Serial number
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical data" in combination with power unit
AMW 10 (3 600 HA3 0..) is in conformity with the following
standards or standardization documents: EN 60335 according
to the provisions of the directives 2011/65/EC,
2004/108/EC, 2006/42/EC, 2000/14/EC.
2000/14/EC: Guaranteed sound power level 96 dB(A).
Equipment category: 33
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
15.10.2013

Noise/Vibration Information

The following information is applicable for the attachment op-
erated by the power unit:
Measured sound values determined according to EN 60335,
EN 786.
Typically the A-weighted noise levels of the product are: Sound
pressure level >85 dB(A); sound power level 94 dB(A). Uncer-
tainty K =2 dB.
Vibration total values (triax vector sum): Vibration emission val-
2
ue a = 3.5 m/s , Uncertainty K= 2 dB.
h
English | 7
AMW RT
0 600 8A3 C..
cm 15
cm 36
kg 1.35
/II
see type plate on the
garden product
F 016 L70 918 | (24.10.13)