Proper Use; Technical Data; Before Starting The Equipment - EINHELL GC-MT 3060 LD Originalbetriebsanleitung

packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
•
Safety instructions

3. Proper use

The machine is designed for digging over beds
and fi elds. Be sure to observe the restrictions in
the additional safety instructions.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GC_MT_3060_LD_SPK1.indb 19 Anl_GC_MT_3060_LD_SPK1.indb 19
GB

4. Technical data

Engine: ........................ 4-stroke engine, 139 ccm
Engine rating: .................................. 3 kW / (4) hp
Engine working speed: ......................... 3600 rpm
Working width: ............................................60 cm
Hoe blade diameter: ...................................26 cm
Forward gear: .................................................... 1
Starting system: ....................... Reversing starter
Fuel: .............................. Regular unleaded petrol
Engine oil: ......................... approx. 0.6 l (10W30)
Tank capacity: .................................. approx. 2.2 l
Vibration a : ............................................6.1 m/s
hv
K uncertainty ...........................................1.5 m/s
Weight: ........................................................36 kg
Spark plug: ............................................. LG F6TC
L sound pressure level ........................ 84 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level .......................... 95 dB(A)
WA

5. Before starting the equipment

Assembling the guard plate and the transport
wheel
1. Arrange the components properly as descri-
bed in section 2.1 Layout.
2. Fit the transport wheel (5) to the engine/gear
unit (1) as shown in Fig. 3c.
3. Fit the guard plate (4) as shown in Fig. 3d.
4. Fit the spring (11) and the small split pin (12)
as shown in Fig. 3e.
Assembling the cultivator blades and the
depth stop
1. Arrange the components properly as descri-
bed in section 2.1 Layout.
2. Fit the right cultivator blade (13a), the left cul-
tivator blade (13b) and the limiting discs (14)
(Item 14) as shown in Fig. 4c. Make sure that
the sharp side of the cultivator blade (Fig. 4d/
Item A) faces in the direction of rotation.
3. Fit the depth stop (15) as shown in Fig. 4e
and secure in position with the large split pin
(16). We recommend securing the depth stop
in the middle position of the 3 possible posi-
tions when you begin your work. If you want
to change the working depth, move the depth
stop by sliding it up or down.
- 19 -
2
2
10.08.2015 16:45:15 10.08.2015 16:45:15