Controls Ans Connectors - Adam Sub24 Bedienungsanleitung

Controls and Connectors
Mode
This push button gives a choice between Signal On: woofer starts operation as
soon as a musical signal arrives, and stops after 15 minutes without a signal.
Continuous: the unit is always working.
We recommend the "Signal on" position that minimises power consumption and has proved
to be practical that way as you do not need to look for the main power switch any more.
Phase Switch
With the Phase switch you can alter the phase of the Sub24 relative to the satel-
lites. Practically it means you change the polarity of the bass unit. Depending on
the distance between woofer and satellites 0° or 180° may be the better position. There is
no "right" or "wrong" position, you have to find out by yourself what sounds better, more
exactly and more homogeneous in the low end. If you reposition the Subwoofer you need
to repeat the procedure.
5